Détecteur de présence Blanc encastré 360° 1 canal 8m IP54 80W Led connecteur Wieland

TheRonda S360W GST presence (and motion) sensor is suitable for lighting control.

This detector is pre - wired with WIELAND GST cables and plug - in connectors. This significantly reduces the installation time and cost. The length of the cables is 1.5 m.

It is intended for indoor use and flush ceiling mounting.

360° round detection area up to Ø 9m (64 sqm)

Mixed light detection (suitable for all types of lighting)

Set for immediate operation (brightness switching value: 300 lx and time delay: 10 min).

The brightness threshold and time delay settings can be changed with theSenda P or theSenda B remote controls.

Sensitivity detection settings with theSenda P or theSenda B service remote controls.

Brightness learning function. Test function to check operation and detection area.

TECHNICAL FEATURES

Operating voltage: 230V AC 50 Hz

Consumption: 0.5W

1 light channel

Mounting height from 2 to 4m

Brightness threshold from 30 to 3,000lux,

Preset: 300lux

Lighting timer from 10s to 60min,

setting: 10min,

Pulse function possible

Lighting channel switching capacity: 10A / 230V AC (cos phi = 1)

Maximum loads:

halogen or incandescent lamps: 2,300W

fluorescent tubes compensated or not: 1,150VA

tubes with electronic ballast: 10 x 54 / 58W, 16 x 35 / 36W

compact lamps: 1,150VA

LED < 2W: 25W, LED = 2W: 250W

IP54 protection degree

Protection class: II

Spring terminal connection

Maximum cable cross - section: 2 x 2.5 mm²

Allowed temperature: 0 to + 50 °C

White finish.