Détecteur de présence Blanc encastré 360° 2 canaux 9m IP54 200W Led

TheRonda S360 - 101 UP WH presence detector is intended for automatic lighting control via 230 V contact (switching only) and / or HVac control via potential - free contact.

Round detection area 360° up to 9m diameter (64 m²), possibility to limit the detection area by means of segments

Instant start - up due to factory presets

Sensitivity of detection adjustable by remote control

Detection of natural and artificial light (mixed light measurement) and is therefore suitable for all types of lighting (TL, incandescent, halogen, LED)

Manual light switching possible by connecting a push button or switch with automatic push button / switch detection

Setting of brightness threshold and time delays via infrared remote control theSenda B, theSenda P

Reduction of the switch - off delay in case of short - term presence (passage)

Parallel master / slave or master / master connection possible to extend the detection area

Automatic or semi - automatic operation (switch - on via push button or switch, automatic triggering depending on absence or brightness)

Adjustable brightness switching value, teach - in function

Pulse function for combination with staircase timer

Test mode to check function and detection area

Recessed ceiling mounting, optional surface mount housing.

TECHNICAL FEATURES

Operating voltage: 110 to 230 V AC + 10%, - 10% 50 to 60 Hz

Standby power consumption: ~ 0.1W

Recessed ceiling mounting at a mounting height of 2 to 4 m, optional surface mount housing

360° detection up to 8 m for transverse movement, and up to 4 m for seated person or frontal movement

Brightness adjustment range from 30 to 3000lux, preset = 300lux

Lighting contact: 1 contact 10 A / 230 V AC cos phi = 1 (2300 W, 1150 VA)

Lighting triggering timing from 10 s to 60 min, pulse, preset = 10min

Temporization at HVac switch - on: 0 s to 10min,

Preset = 0 s

Temporization at HVac switch - off: 10s to 120min,

setting = 10 min

Maximum LED load: < 2W: 60W, > 2W: 180W

Start - up current intensity: 800 A / 200 µs

Maximum number of electronic ballasts: T5 / T8 16 x 54 / 58 W, 24 x 35 / 36 W, 8 x 2 x 54 / 58 W, 12 x 2 x 35 / 36 W

Protective degree IP54

Allowed temperature from - 15 to + 50 °C

Connection via screw terminals, max. cable cross section 2 x 2.5 mm².

White finish.